PP4-62A型聚丙烯離心通風機系列 PP4-62A型聚丙烯離心通風機參照金屬4-62性能參數采用聚丙烯板，加熱壓模焊接而成。其廣泛應用于科研、化工、冶金、電子、醫藥、紡織、儀表、電鍍、礦山、學校酒店、賓館、實驗室、環保配套設備等行業中作通風換氣排除酸堿性等有害氣體通風之用。但不允許輸送含芳香族化合物、脂肪族與芳香族碳氫化合物的鹵素衍生物、酮類等腐蝕性氣體。具有耐化學腐蝕、不易老化、比重小、機械振動小、噪音低、運轉平穩等特點。其所輸送氣體不允許含有粘性物質、所含粉塵及硬質顆粒≤150mg/m3、氣體溫度50℃、相對濕度≤100%。且避免陽光暴曬、風機現場附近不得有熱源。
PP4-62A polypropylene centrifugal fan series The PP4-62 polypropylene centrifugal fan is made of polypropylene plate and heating die according to the metal 4-62 performance parameters. It is widely used in research, chemical, metallurgy, electronics, medicine, textile, instrumentation, electroplating, mining, school hotels, hotels, laboratories, environmental protection equipment and other industries for ventilation and ventilation to eliminate harmful gases such as acid and alkali. . However, it is not allowed to transport a corrosive gas such as a halogen derivative containing an aromatic compound, an aliphatic or an aromatic hydrocarbon, or a ketone. It has the characteristics of chemical corrosion resistance, aging resistance, small specific gravity, low mechanical vibration, low noise and stable operation. The gas to be transported is not allowed to contain viscous substances, dust and hard particles ≤150mg/m3, gas temperature 50°C, relative humidity ≤100%. And avoid sun exposure, there must be no heat source near the fan site.
